48V LED light ON-LOCATION power solution for ARRI Skypanel S60, S120 and Orbiter, Aputure 600D, Creamsource Vortex8, FiilexLED Q5,Q8, Nanlite Forza etc...
G-PB48 M2 power distributer requires a pair of MONSTER batteries (G-B100/390W 26A 14.4V).
This two-batteries power solution can draw maximum 650W. It operate 48V light sources independently from an AC power source.
* Required Battery
A Pair of G-B100/390W 26A (recommended) either
A Pair of G-B100/390W 26A
* Application LED & Run time w/ G-B100/390W 26A (at 100% full brightness)
Creamsource Vortex8 : 1 hour
Arri Orbitor : 2 hours
Arri Skypanel S60 : 1 hour 40mins
Aputure 300d II : 2 hours 20 mins
Aputure 600d : 50 mins
*B-STOCK_ GEN ENERGY G-PB48 Mark II Power Distributor
-
Power distributor designed with Gen Energy’s advance PCB, firmware and chipset.
-
Max output 650W (48V, 13.5A.) when in use of MONSTER battery (G-B100/390W 26A)
-
Max output 500W (48V, 10A.) when in use of G-B100/290W 22A battery
-
Compact and light enough to mount and carry.
-
* Run time at 100% full brightness w/ a pair of MONSTER batteries (390Wh, 26A, 14.4V)
* Total 780Wh (when in use of two MONSTER batteries)
ARRI SKYPANEL S60/120 1H 45M Max. ARRI SKYPANEL S30 3H 30M Max. ARRI ORBITER 1H 55M Max. Aputure 600D 50mins Max. Aputure 300 II 2H 20M Max. Creamsource Vortex 8 1H 3M Max. Connector 3-pin XLR Power DC output 48V , 13.5A regulated Batteries
Output
14.4V 26A (minimum. 312W) Battery G-B100/390W 26A ( 2pcs required ) Weight 1.5Kg (3.3 lbs) (without batteries) Dimension 217 x 154.8 x 92 mm (8.54 x 6.09 x 3.62" ) Operating temp. -10 ~ +45 °C recommended